
8 models compared
Automotive Multimeters
Choose the Fluke 88V for automotive electrical measurements.12
Compare products. Choose well.
Find your starting point

8 models compared
Choose the Fluke 88V for automotive electrical measurements.12

3 models compared
Choose the FLIR TG268 for an on-tool thermal view with a measurement ceiling of 400 °C.3

8 models compared
Choose the Topdon BT100 for checking a 12V car battery and investigating cranking or charging-system problems.4

17 models compared
Our pick is the NOCO Genius5 for 5 amp charging and automatic maintenance of compatible 6 or 12 volt batteries.56

18 models compared
Choose the INNOVA CarScan Pro 5610 for supported multi-system diagnosis and actuator testing with repair guidance and no update fees.7

5 models compared
Choose the 81900 for mixed SAE and metric work; choose the 81916 when a broader metric selection matters more than inch sizes.89

5 models compared
Our pick is the OTC Deluxe Compression Tester Kit for gasoline-engine checks. It includes a deep-well connector and spare seals.10

4 models compared
Choose the CTA Manufacturing 9376 for a first cooling-system tester with tapered adapters.11

2 models compared
For hand-operated brake bleeding, the Phoenix Systems V-5 DIY is the default pick here. Choose the Motive 0108 specifically for a GM reservoir with the round, three-tab twist-lock cap; check the stock cap before ordering.121314

5 models compared
Choose the Equus 3640 for checking gasoline fuel-injection pressure on a vehicle with a Schrader-valve test port.1516
8 models compared
Choose the DWE402 for corded garage grinding. Stay with Milwaukee M18, Bosch AMPShare or FLEX 24V when you already own the matching batteries; choose the Metabo 600488420 when you need a 6-inch wheel. For dedicated cut-off work, the DCG432XB is the distinct alternative.17–22

6 models compared
Start with the TEKTON SKT95304 for a general automotive socket kit. It combines SAE and metric coverage with ratchets and carrying cases.23
1 model
Our pick is the Pro-Lift B-S12D, rated for 24,000 pounds: choose it when your approved lift point accommodates its 6-inch starting height and needs no more than its 10-5/8-inch maximum height.2425

2 models compared
Choose the Arcan A20018 when its 3-ton rating and saddle range of 3.78 to 18.9 inches meet your lifting requirements. At 52.91 pounds, it is easier to carry than the 100.8-pound Big Red AT84007R.2627

3 models compared
Choose the DeWalt DCF891B for a cordless half inch impact wrench when you already have compatible DeWalt batteries.28

3 models compared
Choose the Draper 31758 for inspections where a long probe and an on-tool screen are the priorities.29

1 model
Choose the Powerbuilt Unijack when a 3-ton single-device rating and an 11 to 21-inch lifting-height range meet the vehicle lifting and support instructions. Its manual requires hard, level surfaces that can sustain the load; check the approved points and saddle clearance before buying.303132

2 models compared
Choose the OTC 5610 for engine-oil and transmission-pressure testing with separate high- and low-pressure gauges and a 72-inch hose. Check the supplied adapter threads, sealing method and gauge range against your vehicle’s test procedure before buying.3334

5 models compared
Choose the PP3CSRED for routine voltage and powered-component checks. Choose the Maestro when you need trace capture and app logging, the PP4 for AC and pulse-width functions, or the PS100 when you want a case kit with a separate extension and lighter adapter.35–38

2 models compared
Choose the Milwaukee 48-22-8559 if you have space for its 52-inch cabinet and want 12 drawers with a wood worktop.3940

1 model
For a driver or technician chasing a leak with smoke, the Redline Detection Smoke Pro Total Tech is the default pick.4142

5 models compared
Choose the Innova 5568 Pro-Timing Light for supported 12 V negative-ground timing checks with both engine-speed and spark-advance readings.43

3 models compared
For a separate tire-pressure gauge, choose the JACO ElitePro Digital 100 PSI. Its 5 to 100 PSI working range and 10-inch hose let you check pressure with the display away from the tire valve.44

5 models compared
Our pick for mechanical tightening with a 1/2-inch-drive socket and a specified 40 to 300 ft-lb torque is the TEKTON TRQ52403. Choose the 3/8-inch-drive TRQ51402 for a 10 to 39 ft-lb specification or when that drive fits your socket for a setting within its 10 to 100 ft-lb range. For a 50 to 250 ft-lb task, both the GEARWRENCH 85196 and 85077 signal at the target. The 85196 measures angle for procedures that require it and has a 15° flex head for access in tight confines. The 85066M's nominal range begins at 30 ft-lb, but its stated accuracy begins at 50 ft-lb, so it is not the lower-torque choice.45–53

2 models compared
Choose the Foxwell T2000WF when you replace tire pressure sensors and need to set up the new ones.54

9 models compared
Our pick is the Pro-Lift T-6903D: it comes as a matched pair, starts at 11.25 inches and combines handle locks with a mobility pin.55–58
Explore the models