Buying guide

Integrated Jack Stands

Our pick

Powerbuilt Unijack Stand

Choose the Powerbuilt Unijack when a 3-ton single-device rating and an 11 to 21-inch lifting-height range meet the vehicle lifting and support instructions. Its manual requires hard, level surfaces that can sustain the load; check the approved points and saddle clearance before buying.¹²³

Why this one

The Unijack combines hydraulic lifting with a locking lever that engages a ratchet bar as the vehicle rises. The 11 to 21-inch range describes lifting height, so follow the manual locking procedure for support rather than assuming every lifting height is a locked position.¹²³

Read the review

Buying advice

Use only on hard, level surfaces capable of sustaining the load. The manual recommends a matched pair to support one end and prohibits supporting both ends or one side simultaneously; a pair does not authorize adding the ratings into a whole-vehicle capacity.³

Specifications

Specification	Our pickPowerbuilt Unijack Stand
Weight capacity	3 ton¹
Minimum lifting height	11 in²
Maximum lifting height	21 in²
Weight	22.7 lb⁴
Type	Integrated jack stand¹
Mechanical support lock	As vehicle rises, the locking lever should engage ratchet bar to prevent accidental lowering.³
Permitted support surface	THIS JACK IS DESIGNED FOR USE ONLY ON HARD LEVEL SURFACES CAPABLE OF SUSTAINING THE LOAD.³
Permitted support configuration	IT IS RECOMMENDED THAT A MATCHED PAIR BE USED TO SUPPORT ONE END OF A VEHICLE ONLY. • PRODUCT IS NOT TO BE USED TO SIMULTANEOUSLY SUPPORT BOTH ENDS OR ONE SIDE OF A VEHICLE.³

Buying advice

Specifications

Sources