Buying guide
Vehicle Jack Stands
Our pick
Pro-Lift Double-Pin Jack Stands (Set of 2)
Our pick is the Pro-Lift T-6903D: it comes as a matched pair, starts at 11.25 inches and combines handle locks with a mobility pin.1–4
Why this one
- The package includes two stands, with a 3-ton rating for the pair. Their support-height range is 11.25 to 16.75 inches, and the height-retention mechanism uses handle locks and a mobility pin.1–4
The alternatives
Other contenders
Choose the ESCO 10498 when you want to buy stands individually and need its 13.2 to 21.5-inch support-height range. Each stand is rated at 3 tons and uses a pin and linchpin to retain its height; check the vehicle support points and use matching stands as the manual directs.612
ESCO 10497-PAIR Axle Jack Stands, Pair
Choose the ESCO 10497-PAIR for approved axle support that fits its conventional axle saddle. Its 13.2 to 21.5 inch range reaches higher than the Shorty, but the taller starting height rules it out for lower support points. This pair contains two stands rated for 3 tons each.781213
ESCO 10499-PAIR Shorty Jack Stands, Pair
For approved support points that fit a flat rubber saddle, choose the ESCO 10499-PAIR. Its 11 inch starting height makes it the lower ESCO option, with adjustment up to 17 inches. The package contains two stands rated for 3 tons each.781214
Sunex Tools 10-Ton High Jack Stands (Set of 2)
Choose the Sunex 1410 pair for vehicle-approved support heights from 28.1 to 46.5 inches. Its 10-ton rating applies across the pair, and its locking pins retain the support columns; the maker specifies supporting one end of a vehicle on a hard, level surface.10
Torin Big Red Jack Stands (Set of 2) 6 Ton
Choose the Torin T46002 pair when its 6-ton per-pair rating and 15 3/8 to 23 13/16-inch support-height range match the job. Its ratchet bar is retained by the locking handle; follow the manual's engagement check before loading.1115
Buying advice
9 models / at a glance
Key differences
Compare the options
9 products
Narrow your options
Reset requirements9 models in this chart.
Maximum support height (in); higher is preferred · 0 to 46.5
Minimum support height (in); lower is preferred · 0 to 28.1
Pro-Lift Double-Pin Jack Stands (Set of 2)
- Minimum support height
- 11.25 in
- Maximum support height
- 16.75 in
Compare models side by side
Choose two or three products to compare.
Models in this comparison



Every specification for these products
| Specification | Pro-Lift Double-Pin Jack Stands (Set of 2) | AFF 3305A Jack Stand Pair | Esco 3-Ton Jack Stand | ESCO 10497-PAIR Axle Jack Stands, Pair | ESCO 10499-PAIR Shorty Jack Stands, Pair | OTC S03 Jack Stand Pair | OTC S06 Jack Stand Pair | Sunex Tools 10-Ton High Jack Stands (Set of 2) | Torin Big Red Jack Stands (Set of 2) 6 Ton |
|---|---|---|---|---|---|---|---|---|---|
| Capacity basis | Per pair1 | Per pair5 | Per stand6 | Per stand7 | Per stand8 | Per pair9 | Per pair9 | Per pair10 | Per pair11 |
| Minimum support height | 11.25 in3 | 13 in16 | 13.2 in6 | 13.2 in7 | 11 in8 | 12 in18 | 15.625 in19 | 28.1 in10 | 15.375 in15 |
| Maximum support height | 16.75 in3 | 17 in17 | 21.5 in6 | 21.5 in7 | 17 in8 | 17.6875 in18 | 23.6875 in19 | 46.5 in10 | 23.8125 in15 |
| Weight per stand | — | — | 11.4 lb6 | — | — | — | — | — | — |
Find the right fit
9 products
How they compare
| Specification | Our pickPro-Lift Double-Pin Jack Stands (Set of 2) | AFF 3305A Jack Stand Pair | Esco 3-Ton Jack Stand | ESCO 10497-PAIR Axle Jack Stands, Pair | ESCO 10499-PAIR Shorty Jack Stands, Pair | OTC S03 Jack Stand Pair | OTC S06 Jack Stand Pair | Sunex Tools 10-Ton High Jack Stands (Set of 2) | Torin Big Red Jack Stands (Set of 2) 6 Ton |
|---|---|---|---|---|---|---|---|---|---|
| Buy | |||||||||
| Capacity basis | Per pair1 | Per pair5 | Per stand6 | Per stand7 | Per stand8 | Per pair9 | Per pair9 | Per pair10 | Per pair11 |
| Minimum support height | 11.25 in3 | 13 in16 | 13.2 in6 | 13.2 in7 | 11 in8 | 12 in18 | 15.625 in19 | 28.1 in10 | 15.375 in15 |
| Maximum support height | 16.75 in3 | 17 in17 | 21.5 in6 | 21.5 in7 | 17 in8 | 17.6875 in18 | 23.6875 in19 | 46.5 in10 | 23.8125 in15 |
| Weight per stand | — | — | 11.4 lb6 | — | — | — | — | — | — |